Sound Module Button Control Music Voice Player Programmable Talk Chip Musical 8MB MP3 WAV USB Downloadable with AA Battery Box + USB Cable for DIY Audio Cards Christmas Creative Gift
$14.99
Price: $14.99
(as of Oct 01, 2024 16:14:11 UTC – Details)
Specifications:
-Built-in Flash Memory: 8MB (8 Bytes)
-Speaker Output: 0.5-1W
-Speaker Size: 36mm Diameter
-Module Size: 30*30mm
-USB socket type: Micro-B
-Battery Power: 4.5-5V or 3.7V lithium battery
-Based on using 3 x AAA batteries that are 2500mAh rating
-Recommended MP3 file format: 128kbps, 44.1kHz, 16 Bit, MONO
-Battery life example: One single 10 second sound file will playback 14,400 times
Using Instructions:
Step 1: Connect 4.5V~5V non-rechargeable battery power or 3.7V lithium battery.
Step 2: Press the button, and you will hear a test music which is a Chinese song. Press the button during playback, then it will stop playing immediately.
Step 3: Connect the module to computer by USB cable; SUPPORT WINDOWS ONLY
Step 4: It is recognized by computer as a USB drive, just like a MP3 player, and you’re free to add any MP3/WAV audio file to the internal storage as long as it doesn’t go over the 8MB limit;
Step 5: Do not forget to delete the default audio file;
Step 6: Repeat Step 2 to see if the module work well. Adjust the volume to a suitable degree.
![AGM PAD P1 Rugged & Waterproof Android 13 Tablet with Keyboard & Stylus, Drop-Proof/Dustproof, MTK G99 Chipset, 2K Display FHD+ IPS, Dual Box Stereo Speakers, 7000mAh, 4+128GB[TF 2TB], GPS, WiFi](https://i2.wp.com/m.media-amazon.com/images/I/71l7YfS2AqL._AC_SL1500_.jpg?w=300&resize=300,300&ssl=1)
Attention: This item comes with the button and default mode: 000. You can change to different modes by adjusting the 3.3K resistors. For the detail please refer to the picture 2.
Package Included:
1 x Recordable Sound Module Button Control 8MB
1 x AABattery Box
1 x Micro USB Cable
【Programmable Sound Module】Provide more possibilities to develop a module completely fit for your own project. You can select different trigger mode (button/TTL trigger) by connecting with different soldering pads.
【Button Control】 Install it in your project/gift, and then push the button. Your music which you put in it will be played once and automatically stop when the song finishes. This item comes with the button and default mode: 000.
【8M Memory】Built-in 8M memory with micro USB port, you can update the music just by a smart phone USB cable. It is recognized by computer as a USB drive, just like a MP3 player, and you’re free to add any MP3 audio file to the internal storage as long as it doesn’t go over the 8MB limit.
【With Battery Box and USB Cable】This Kit contains with a AAA Battery Box and USB Cable, with which you can easier to supply 4.5-5V power and also used for different USB devices to download the MP3 audio file to the internal storage.
【Perfect Creative Gift】It is ideal to make a DIY music box, musical greeting cards, photo frames, album, gift box and the other creative gifts for Christmas’s Day, Mother’s Day, Valentine’s Day. Any further question please don’t hesitate to contact us via E-mail to get technical support.
Customers say
Customers like the functionality of the product. They mention it works well and is ideal for their application. However, some customers have differing opinions on the sound quality, ease of use, and value for money.
AI-generated from the text of customer reviews
8 reviews for Sound Module Button Control Music Voice Player Programmable Talk Chip Musical 8MB MP3 WAV USB Downloadable with AA Battery Box + USB Cable for DIY Audio Cards Christmas Creative Gift
Add a review
You must be logged in to post a review.
Related Products
$14.99
![Chicago Fire: Electro [Download]](https://i1.wp.com/m.media-amazon.com/images/I/71ufxTXb3KL._SL1428_.jpg?w=300&resize=300,300&ssl=1)
EEWhiz –
Helpful hint and opinions from an electrical engineer
Hint:1. Unplug the USB cable before attempting to play audio file. It wonât play if the cable is attached.2. I was able to get 117 kbps, 128 kbps and 320 kbps (default file) to play. Other rates will probably work but I didnât try any others.I am a retired electrical engineer and needed a small module to play a small MP3 file. This module package seemed reasonably priced for what you get. The actual circuit board, switch and speaker were wrapped in pink anti-static bubble wrap. This was placed in a standard plastic zippered bag along with a battery case and USB cable. For ESD purposes it seemed adequate, but not great.My opinion is that the overall quality of this module package is very good. The circuit board was made using modern surface mount and machine soldering. The only thing that was a hand operation is the attachment of wires for the external pieces which is a normal process. Hot melt glue is used to reinforce the external connections, which is a nice precautionary measure taken for enhanced reliability.The switch and USB cable are way better than I expected. The switch is large and has a nice tactile feel as it snaps through center. The USB cable felt very secure when it was plugged into the circuit board.The best part of all this is that it actually worked on the first try! Attach the battery pack and be sure that both the pack and circuit board have their switches turned on. Press the button and the default song playsâ¦â¦.yeah. Plug in the USB cable and on Windows 10 – 64 bit home edition a new drive appeared in the File Explorer. Be sure to delete the default file and copy the desired file in its place. Be sure to unplug the USB cable before pressing the switch. Thatâs all there is to it. I havenât tried triggering it with an external signal yet but will try later.The speaker has absolutely no bass, as would be expected for such a small speaker in no cabinet. I bet it would sound much better if it were placed in a small sealed box. Or, tap off the speaker signal and feed it into an external amp and use some decent speakers. Thatâs my plan.You donât need to be an electrical engineer to use this.
Amazon Customer –
Perfect for my music boxes.
I use these sound modules in my wooden music box. There easy to modify, easy to install any song on them. The instructions are simple. The volume control is a little hard to adjust.All in all it works very good. I just wished I the company would give me a bulk price on them.
Stewart –
Decent Product
Setting up the product is a little interesting, but it worked. You have to reformat it if it does not work the first time. You need a small screwdriver to change the volume but that’s alright. The sound quality is pretty much what I would expect a speaker that size to have. Overall, it works well, has decent volume, and is fairly simple to use.
bilagaana –
Very easily converted to USB power. Ideal for my application.
Most of the sound modules currently sold have battery holders on the PCB (printed circuit board). I wanted a sound module that could be powered by a USB connection. At this scale, identifying and bypassing the tracings while not ruining the unit would be a challenge. With this WayinTop module, all you need to do is take a surplus USB plug, identify the two power pads (USB cables have both power and data circuits. In a basic USB A plug, the power pads are the two outside ones) and the wires connected to them (If in doubt, a simple continuity test with a multimeter will confirm), then splice and solder those to the battery leads. It sounds more complicated than it is. The sound quality is not great. It’s better than one of those annoying greeting cards and about equal to a lot of toys. It could not be simpler to upload sounds. If you’re able to do a little desoldering and swapping of subminiature components, there are a number of playback options as shown in the chart image, above.
Marc Tofsted –
Makes a sound, not very loud.
I bought this to add sound-clip to a stuffed doll.The sound-clip chip operation is flawless and the amplifier on the board is powerful.The 1″ speaker that comes with this kit is VERY quiet and can barely be heard inside a doll.I replaced this speaker with a 2″ 8 Ohm model in a small box and the sound output was GREAT.
Amazon Customer –
Exactly as described.
Connect battery, connect to usb port with enclosed cable (sound module appears as a USB drive to windows), copy an mp3 file to the new “drive”, disconnect USB cable, press button attached to sound module to playback the mp3 file through the enclosed speaker. You can also substitute power source and speaker. Simple, effective, affordable. I love it.
Floyd Lipford –
Nice
Easier than I thought to add sound to my projects.
DM –
50/50 on if yours works or not
I ordered one of these and it didnât work at all. Connected the power pack and put the board and battery in the on position. Press the button andddd⦠nothing. Tested the power pack with an led and its working. Ordered a second and same exact issue. This board wonât power on and work at all. It willing to try again and the company only offered me a 5.00 refund on a 15.00 product. Thankfully within my Amazon return period. If your going to try your luck better buy in bulk to filter out the duds